Blog

How to use a teleprompter on iPhone

To use a teleprompter on iPhone, install a teleprompter app, paste your script into it, choose how the text should move and press start. The script then scrolls on the screen while you talk. In Wispim the text can follow your voice, so it keeps up when you speed up and waits when you pause.

You can read it full screen, or in a floating window that stays on top of Camera, Instagram or TikTok while you record.

Try your first take on iPhone

Wispim scrolls the script as you speak, so your eyes stay on the lens.

Download on the App Store 6 free takes. iPad, iPadOS 16 or later.
Get it on Google Play Android 8.0 or later.
Download on the App Store 6 free takes. iPhone, iOS 16 or later.

The steps, in order

  1. Install Wispim from the App Store. Wispim runs on an iPhone with iOS 16 or later. There is no account and no sign-up, so you can open it and start.
  2. Write or paste your script. Typing, pasting and editing scripts is free and unlimited. Importing a file is part of Pro.
  3. Pick a mode on the pre-start screen. Voice follows the words you say. Sound scrolls at the speed you set while it hears your voice, in any language. Constant scrolls at a fixed speed.
  4. Set the start delay. It is a per-script setting with four choices, 0s, 5s, 10s and 20s, and new scripts start at 10 seconds. It works in all three modes and holds the text still while you get to your mark.
  5. Choose “Full screen” or “In floating window”. Full screen fills the display. The floating window sits on top of other apps, so you can start recording in Camera first and read from the window.
  6. Read. In Voice mode, start where the script starts and talk at your own pace. Control the take with your voice, as described below.

How to use a teleprompter covers technique: distance, font size and eye line. This page stays with the phone.

Which mode and window for which situation

SituationModeWindow
You talk to the camera and want the text to match your paceVoiceFloating window over Camera, or full screen
Voice cannot follow your language, or exact words matter lessSoundEither
You read a fixed script at a steady pace, or the room is noisyConstantEither
You film with the front camera and want your eyes near the lensVoiceFloating window, Strip shape
You rehearse at a desk before filmingVoice or ConstantFull screen
You use a beam-splitter rigAnyEither, with “Mirror text” on

Voice recognises your speech and scrolls to the words you actually said. Sound reacts to the level of your voice and does not recognise words. For a take where you must hit every line, Voice is the better fit. For a language or a noisy place where recognition struggles, Sound or Constant is simpler.

Reading over another app with the floating window

The floating window keeps the script on top of other apps. Open Camera, Instagram or TikTok, press record, and read from the window while you talk to the lens. The floating teleprompter page shows how it looks.

The window has three shapes, chosen in Settings under Floating window look:

  • Wide is 3:2 and is the default.
  • Tall is 2:3.
  • Strip is a thin band sized for two lines. It is meant to sit just under the front camera, so your eyes stay close to the lens.

The text size follows the script’s own text size, scaled to the window, and Strip shrinks it to fit two lines. Side margins from 0 to 40 pt are the setting that is separate. iOS has the final say on the window’s size, and it snaps to a corner the way Picture in Picture does.

Nothing inside the window responds to touch, so you cannot tap a word or drag the text there. That is a limit of iOS, and it is why voice commands and the volume buttons exist. A small label in the top corner appears only when there is something to say, such as a command confirmation, “Mic busy”, “Paused” or “Listening again”. When all is well the window shows nothing extra.

When the start delay runs, the window shows a large number with “Starts in N s”, readable from a tripod. Tapping the window does not skip it.

Wispim scrolls the script as you speak, so your eyes stay on the lens.

Recording the video

Record video with your script in front of you, using the front or back camera, with sound. The script follows your voice while you record, and videos are saved to Photos. On iPhone Duo, film yourself with the back camera and read your script on the outer display; the iPhone Duo page has the details.

If you would rather record in the Camera app, Instagram or TikTok, use the floating window above. Voice tracking keeps following while you record in all three, and the camera settings guide covers front or back lens, resolution and steady framing.

Controlling a take without touching the phone

Say one of five voice commands while you read: “pause”, “continue”, “go back”, “start over” or “go to the end”. “Go back” moves one sentence back. Pause for a moment and say the phrase on its own, so it is not mistaken for part of your script. Voice commands exist in 10 languages, the phrases can be edited per language, they are on by default, and they follow the script’s recognition language rather than the interface language.

There is no spoken “forward”. To move one sentence forward, use the volume buttons: volume up goes one sentence forward and volume down one back. They are off by default and marked Experimental, under Settings, Advanced, Voice commands. They do not work while a camera app is in front, because there the buttons take the photo. The phone’s volume really changes as you press them, and they stop at either end of the volume range.

In full screen you can also tap a word to carry on from it, or drag the script to look ahead. Following pauses while you browse, and a note at the top says “Browsing”. For ways to stay natural while you read, see reading a script on camera without looking.

What happens when another app takes the microphone

Camera apps sometimes grab the microphone. If another app takes it, a Voice or Sound take waits. The text holds on the word you reached, and after a moment a note at the top of the screen and the floating window both say “Mic busy”. Wispim keeps trying to get the microphone back. When sound comes in again, the note says “Listening again” and reading carries on from the same word. It is always on and there is no setting for it. To read at a fixed speed instead, end the take and choose Constant.

Wispim scrolls the script as you speak, so your eyes stay on the lens.

Where recognition runs

For Voice, recognition runs on your device where your language supports it. In some cases your device sends the audio to Apple to turn it into text. Your scripts, audio and transcripts never reach us. Voice following works in every language the iPhone can recognise, which is 60+ locales on current iOS.

A mirror for a beam-splitter rig

If you film through a beam-splitter glass, turn on “Mirror text” for that script. It flips the script left to right, and it applies in the floating window too. It is a per-script setting, so your ordinary scripts stay as they are.

Wispim scrolls the script as you speak, so your eyes stay on the lens.

What is free and what Pro adds

The free tier is six prompter takes. A take is any start of the prompter, full screen or floating window, in any mode, and the six do not refill. Every scroll mode, the floating window, voice commands and unlimited scripts are all in the free tier.

Pro removes the take limit and adds file import from TXT, Markdown, PDF, DOCX and RTF. Pro is a monthly subscription, a yearly subscription or a one-time purchase, and there is no free trial. The cost page lays the prices out.

If you want to compare other iPhone teleprompter apps before you choose, the iPhone round-up lists them with prices. For voice-following in particular, see the voice teleprompter page.

Questions

Can I use a teleprompter on my iPhone for free?

Yes, for six prompter takes. Writing, pasting and editing scripts is unlimited, and every scroll mode, the floating window and voice commands are included. A take is counted when you press “Full screen” or “In floating window”. Pro removes the limit.

Can I read my script while recording in the Camera app?

Yes. Choose “In floating window” on the pre-start screen, then switch to Camera, Instagram or TikTok and record. The window stays on top. Voice following keeps going while you record in those apps.

How do I pause the teleprompter without touching the screen?

Say “pause” on its own, then “continue” when you are ready. If you stumble, say “go back” to return one sentence. Voice commands work in 10 languages, and they are on by default.

Does the teleprompter work if I speak a different language?

Voice following works in every language the iPhone can recognise. Sound mode scrolls whenever it hears your voice and works in any language. Voice commands exist in 10 languages and follow the script’s recognition language.

What happens if another app uses the microphone?

If another app takes the microphone, a Voice or Sound take waits on the word you reached. A note says “Mic busy”, and when sound comes back it says “Listening again” and carries on from the same word.

Is my script or voice sent to you?

No. Your scripts, audio and transcripts never reach us. Recognition runs on your device where your language supports it, and in some cases your device sends the audio to Apple to turn it into text.

Try your first take on iPhone

Get Wispim on your iPhone

Point the camera at the code to open Wispim in the App Store.

Get Wispim on your iPad

Point the camera at the code to open Wispim in the App Store.

Get Wispim on your Android phone

Point the camera at the code to open Wispim in Google Play.