Blog

How to use a teleprompter for a podcast

A podcast sounds best when it is a conversation, so a teleprompter belongs only where exact words matter. Put the intro, the sponsor read, the transitions, the outro and the call to action on the prompter, and keep the rest of the episode as a short list of notes. You read the fixed parts cleanly, and you talk freely for everything between them.

This guide covers how to split an episode, where to place the prompter for audio and for video, and which mode to use for each segment. Wispim runs on iPhone, iPad, Mac, Windows and Android.

Script your next intro and outro

Wispim scrolls the script as you speak, so your eyes stay on the lens.

Download on the App Store 6 free takes. iPad, iPadOS 16 or later.
Get it on Google Play Android 8.0 or later.
Download on the App Store 6 free takes. iPhone, iOS 16 or later.

What to put on the prompter and what to leave as notes

The test is whether a wrong word would cause a problem. If it would, script it.

Script these parts:

  • The intro, so every episode opens with the same promise and the guest name is right.
  • Sponsor reads, where the wording is often agreed in advance.
  • Transitions between segments, which are easy to ramble through.
  • The outro and the call to action, such as where to subscribe or which link to open.

Leave the questions for your guest, your own stories and anything that depends on the answer you just heard as notes. Read aloud, they sound like a lecture, and short prompts keep the middle of the episode alive.

Writing the scripted parts

Write for the ear. Keep lines short, one idea each, and read each one aloud before you keep it. Put a blank line between segments, so the intro, the sponsor read and the outro each sit in their own block and you can find the start of each at a glance.

End a line where you would breathe. The post how to write a teleprompter script covers sentence length, numbers and how to mark pauses, and how to stop saying um on camera helps with the filler words that scripted parts remove.

Typing, pasting and editing scripts in Wispim is free and unlimited. Keep one script per episode, or one for the intro and outro that you reuse each week.

Where the prompter goes

For audio only, nobody sees where you look, so comfort decides. Put the screen at eye level beside the microphone, so your head stays still and your voice stays at the same distance from the mic. Reading from a screen far to one side turns your head, and the recording gets quieter whenever you turn.

For a video podcast, the prompter goes as near to the lens as you can get it. The closer the text is to the camera, the less your eyes move, and the less obvious it is that you are reading. Read the line, then look at the lens at the end of each sentence. The post how to read a script on camera without looking like you are reading covers eye line and pace.

Wispim scrolls the script as you speak, so your eyes stay on the lens.

A video podcast filmed on an iPhone

If you film the episode on an iPhone, Wispim has a floating window that stays on top of Camera while you record. Open your script, choose “In floating window” on the pre-start screen, switch to Camera and press record. The window keeps the script in front of you.

The window has three shapes. Wide is the default, Tall is 2:3, and Strip is a thin band sized for two lines that sits just under the front camera. For a talking-head podcast, Strip keeps your eyes close to the lens.

Voice tracking keeps following while you record in Camera, Instagram and TikTok. If another app takes the microphone, a Voice or Sound take waits. The text holds on the word you reached, a note at the top of the screen and the floating window say “Mic busy”, and when sound comes back they say “Listening again” and reading carries on from the same word. It is always on, and there is no setting for it.

Wispim also records video with the script in front of you on iPhone. The full steps are in how to use a teleprompter on iPhone.

Recording at a desk on a Mac or a Windows PC

Many podcasts are recorded at a desk. On a Mac, Wispim shows the script in a floating panel above every app, full-screen apps and every Space, so you can read during a call, a presentation or a recording. Drag the panel under the camera and it snaps there. Three shortcuts work from any app: ⌃⌥P pauses and resumes, ⌃⌥F hides and shows the panel, and ⌃⌥T lets clicks pass through to the app behind. The teleprompter for Mac page lists everything the Mac app does, and the floating teleprompter page describes the panel idea.

Wispim for Windows reads the script in a floating panel over slides, a meeting or a call. The panel can sit right under the camera. Ctrl+Alt+P pauses and resumes, Ctrl+Alt+F shows or hides the panel, and Ctrl+Alt+T turns click-through on and off. On Windows, voice following runs on this PC, once the language’s model is downloaded.

The shortcuts are the useful part for a podcast. You can pause the script when your guest takes over, and bring it back for the sponsor read, without reaching for the mouse.

A remote guest on a call

When the guest joins over a call, choose Constant for the scripted parts you read yourself. Set its speed while you read the script aloud once, start the take, and use the pause shortcut when the guest begins to talk.

The set-up is the one in how to use a teleprompter on Zoom, which also covers Teams and Meet.

Wispim scrolls the script as you speak, so your eyes stay on the lens.

Two hosts in one room

With two hosts, each person reads from their own device and their own script. Split the scripted parts by speaker before the recording, so each host has only their lines on their own screen.

Constant is the practical choice for a shared room, because each device scrolls at a speed that host set in rehearsal. Agree who starts a segment, and use the pause shortcut or the voice command “pause” when the conversation takes over.

Which mode for which segment

SegmentModeWhy
Intro and outro read soloVoiceIt follows your words and waits when you pause.
Sponsor read with agreed wordingVoice or ConstantVoice keeps you on the exact words, Constant holds a steady pace.
Your lines with a remote guest on a callConstantThe speed is set in rehearsal and the pause key stops it.
A language Voice cannot followSoundIt moves while it hears your voice, in any language.
Questions for the guestNotes, no prompterShort prompts keep the talk natural.

Voice follows the words you say. Sound moves while it hears your voice, in any language. Constant scrolls at a fixed speed. On iPhone and iPad each script has a start delay of 0s, 5s, 10s or 20s, set per script, and new scripts start at 10 seconds. It gives you time to settle before the first word.

Fix a stumble by voice

Five voice commands work while you read: “pause”, “continue”, “go back”, “start over” and “go to the end”. “Go back” moves one sentence back, so you can fix a stumble and read the sentence again. Voice commands exist in 10 languages, and there is no spoken “forward”.

Wispim scrolls the script as you speak, so your eyes stay on the lens.

Where recognition runs

On Apple devices, recognition runs on your device where your language supports it, and in some cases your device sends the audio to Apple to turn it into text. Your scripts, audio and transcripts never reach us.

What is free and what Pro adds

The free tier is six prompter takes, and the six do not refill. Every scroll mode, the floating window, voice commands and unlimited scripts are included. Pro removes the take limit and adds file import from TXT, Markdown, PDF, DOCX and RTF, which helps if your sponsor sends the copy as a document.

Questions

Can I use a teleprompter for a podcast that is audio only?

Yes. Place the screen at eye level beside the microphone and read the scripted parts, such as the intro, the sponsor read and the outro. Keep the conversation as notes.

Should I script a whole podcast episode?

Script the parts where exact words matter and keep the rest as notes. A fully read episode loses the back and forth that makes a podcast worth hearing.

Can I read a script while filming a video podcast on my iPhone?

Yes. Choose “In floating window” in Wispim, switch to Camera and record. The window stays on top, and Strip is a thin band that sits under the front camera.

How do I pause the script when my guest starts talking?

On a Mac, press ⌃⌥P, and on Windows press Ctrl+Alt+P. On iPhone, say “pause” on its own, then “continue” when you are ready to read again.

Does the teleprompter work with a remote guest?

Yes, with Constant. Set the speed in rehearsal, read your scripted parts, and pause when the guest talks. The call set-up is in the Zoom guide.

What is the best teleprompter for a podcast?

Look for an app that stays above your recording software, scrolls at a speed you set, pauses from the keyboard or by voice, and lets you put the text right under the lens. Wispim offers these on iPhone, Mac and Windows. Try the free six takes on one episode before you decide.

Script your next intro and outro

Get Wispim on your iPhone

Point the camera at the code to open Wispim in the App Store.

Get Wispim on your iPad

Point the camera at the code to open Wispim in the App Store.

Get Wispim on your Android phone

Point the camera at the code to open Wispim in Google Play.